Vinyl Fence: 11 Answers You Need To Know

Vinyl fencing is made from the synthetic plastic like nylon and vinyl. 

They are easy to maintain, simple to clean,  rust-free, durable, and environmentally sustainable. 

The beauty of Vinyl fencing attracts neighbors and passersby. 

On top of that, it is not going to take a lot of time to install this fence. 

Buying the panel and accessories will cost more money. 

But you will also save money in the long run, which makes it a valuable investment. 

Fence Ultimate Guide: Complete guide to selecting, buying and installing your dream fence!

Vinyl Fence: Cost

What is the cost of a vinyl fence? 

Homeowners may spend anywhere between $2,181- $6,089 on installation with the national average at $4,135.

 To clarify how much you will spend, measure the number of feet of your land and multiply the result with the national average of $28 per linear foot. 

Is it cheaper to build a wood fence or vinyl or composite

Between wood, vinyl, and composite, wood is the cheapest to build. 

While wood, vinyl, and composite are available in a different range of styles which can affect the overall cost, on a general note, wood fences require less upfront cost compared to vinyl and composite.

How much does 200ft of vinyl fence cost?

First off, figure out the national average cost to know how much you will spend on vinyl fencing installation. 

As a general rule, a 200ft of a vinyl fence will cost between $3000-$7000 at $10-$35 per foot. 

6ft vs 8ft cost

The 8ft fence panels are usually costlier than the 6ft panel. 

However, 8ft offers a better deal because it requires fewer posts, which means fewer brackets and fewer installation materials like concrete or foam.

 It also cut labor costs because you will only dig a few holes and install a few panels. 

Is vinyl Fencing available in wholesales? 

Many fence suppliers offer wholesale vinyl fencing sales at a decent price.

 But you need to purchase the panels in large quantities when using the wholesaler’s service. 

Vinyl fence installation

Can you put up a Vinyl fence without concrete?

Yes, you can install a vinyl fence with other foundations like gravel. 

However, concrete is the standard for most fence foundations because it is strong and durable.  

Expanding foam is another great option for vinyl fence foundations. 

Are 2 feet deep enough for vinyl fence posts?

2 feet of depth is the standard minimum for a vinyl fence post. 

Make sure you dig your post to at least 2 feet. The recommended standard is to dig 1/2 of the height of the post.

 The deeper the hole the stronger they become. 

How far apart should vinyl fence posts be?

The standard recommended vinyl fence post distance is between 6ft to 8ft. 

Just keep in mind that it may not work for every condition. 

Where to buy vinyl fence accessories?

You can get the vinyl fence accessories from an online supplier or a physical pick-up store. 

Vinyl Fence: Accessories

You must understand the important accessories of vinyl fencing before planning for installation.

 Understanding these accessories and how they work can speed up the entire installation process. 


Do you see the vertical vinyl material that you dig a hole and secure with concrete in the ground? 

That’s the post. Posts are usually strong, thick, and stable – and that’s because they have a lot of weight to carry. 


Rails are the horizontal pieces that run from one post to another. 

Not only do they securely connect the fence post and the picket, but they also provide extra stability to the fence.

 Rails are featured in different positions. There’s the bottom rail that runs around the fence base. The mid-rail runs around the middle of the fence. The top rails run at the topmost position. 


Those vertical materials in the midst of a post are the pickets.

 They keep the fence stable, private, and beautiful. 

Plus, they’re designed in different shapes and forms.  

Post caps 

While post caps in wood fences shield the posts against water damage, in vinyl, it’s more of a design than functionality.  


The gate provides the means of entrance and exit from and out of the garden or yard interior. 

Although gates are strictly functional accessories, there are still classy gates that’ll improve your fence overall look. 


Panels are a component of the gates that are connected through brackets. 

Not only do they represent a part of the fence but they also make the installation process easy. 

Vinyl Fence: Maintenance 

If there is any special advantage of vinyl fences, it’s certainly their low maintenance. It is probably why many people choose them over other fencing types. 

Woods, for example, may require annual pesticide treatment or painting which eventually stains and damages the wood. 

However, there’s some level of maintenance that goes into using vinyl fencing. But they’re minimal. 

Wash regularly 

Cleaning vinyl fencing is easy and can be done in many ways.

 One of them is running a hose over them to eliminate dirt, paper, or leaves around the panel. 

We recommend doing this after a wind when materials accumulate over the panel. 

 Wash the fence at least twice a year.  

Wipe off mildew 

You may notice patches around the rails or panel areas especially post-damp winter. 

To remove this mildew, mix a solution of warm water, bleach, and detergent in a 12:1:1 ratio. It eliminates the mildew and it won’t grow again. 

Inspect regularly 

As a homeowner, you must walk around your land regularly. 

Be sure to shake the post to see if they’re still stable.

 Take your tool kit along and screw any loose bolt. Make sure you screw immediately so you won’t forget. 

What is the life expectancy of a vinyl fence?

A properly maintained vinyl fence can last for as long as many decades – within the range of 20-30 years or more. That’s a higher longevity than wood.  

 Vinyl Fence Post Spacing

Spacing is an important part of wood fencing installation. 

And that’s because posts that are spaced too far will not hold the fence’s weight in place. Some fences also do not sit right in the post. Spacing the post within the standard recommended will ease the installation process. 

The recommended fence post spacing is between 6-8 feet apart. 

Consider Your Neighbor when building a vinyl fence 

Building a new fence goes beyond just you. Your neighbors also need to be put into consideration. 

You need to keep your neighbor in the plan even after you’ve met all the fence building conditions of your county.

 And that’s because the aesthetics of your fence can affect them in many ways.


Dog Digging Under The Fence? Check out these solutions!. So applying some building ethics will help. 

Regular maintenance is key

Although vinyl fences are extremely easy to maintain, you don’t want to take their maintenance for granted.

Always maintain a neat fence and prevent issues of fading or chipping. 

Not only you will benefit from regular maintenance of your fence, your neighbors will too. 

Your neighbors will not be happy to see your fence looking unmaintained. 

Because it may devalue their property should they want to sell.

 The good part is, vinyl fences require less maintenance effort. 

Vinyl Fence: FAQs

Know Your property boundary 

Homeowners need to know where their land starts and ends.

 You can confirm your property boundary by checking them on your house plat. 

Or you can retrieve your property record from your local record office. 

Just hire a land surveyor to measure your property. 

That way you can have a good idea of what your property boundaries are.  

Contact your neighbor 

While it’s not necessary to contact your neighbor when you know your property boundary, ethics suggest that you get in touch with them. 

This will help you hash out legal property issues that may come up in the unforeseeable future. 

Neighbors should see the finished side 

The finished side should face your neighbor. And that’s because they’re the most attractive part of the vinyl fence. 

Besides, they are the recommended standard. 

Your fence will have a more beautiful view when the finished side faces the neighbor. 

Is Permit required?

Yes, you need permits. 

But not in all cases. While some setting up some fences require no permits at all, others may only need that you fill a simple form online or at the local county office. 

However, there are exceptional cases of permit process that may even require paying certain fees. 

You only need permits when you want to make a fence higher than the general recommendation. 

You may also need a permit when you want to build a fence in special zones like steep slopes or areas close to the greenbelt. Not all permits are accepted. 

How much weight can a dog vinyl kennel hold?

A vinyl dog kennel can accommodate between 20lbs – 90lbs of dog weight. 

Does vinyl fence decrease property value?

It’s not guaranteed that a vinyl fence will increase or decrease a property value.

 Several factors determine a real estate valuation such as buyers’ needs, curb appeal, and comparable sales. 

However, a buyer may be willing to pay more if the vinyl fence appeals to them. 

D. Hahn

DIY guru, dad, husband, blogger. When I'm not creating life hacks I'm teaching my kids how to fix stuff after their dad breaks it.

Recent Posts